Firmware update for SIGMA Global Vision lenses in SONY E-mount

We would like to announce that a new firmware update is now available for SIGMA Global Vision lenses in SONY E-mount listed below.

[Applicable product]
・SIGMA 16mm F1.4 DC DN | Contemporary in SONY E-mount
・SIGMA 30mm F1.4 DC DN | Contemporary in SONY E-mount

[Benefits of the update]
The specification has been changed so that the focus position of the lens when the ON/OFF (power) switch is turned “ON”, or when the camera is restored from power save, is set to the same shooting distance when the ON/OFF (power) switch was turned “OFF” or when power save was activated.

——————————————————————————————————————

[Applicable product]
・SIGMA 56mm F1.4 DC DN | Contemporary in SONY E-mount

[Benefits of the update]
・The focus position of the lens when the ON/OFF (power) switch is turned “ON” or when the camera is restored from power saving has been changed to the specification that the focus position is set to the shooting distance right before the ON/OFF (power) switch is turned “OFF” or power saving is activated.
・Improved feeling of the MF operation of the lens.
——————————————————————————————————————

[Applicable product]
・SIGMA 35mm F2 DG DN | Contemporary in SONY E-mount

[Benefits of the update]
・It reduces the AF drive sound.

[How to update]
Please select the appropriate product from the following page, go to the download page, click “Sony E-mount” and follow the update procedure.
https://www.sigma-global.com/en/support/purpose/firmware/?mode=search&product_category=lens
※After the update is complete, be sure to remove the battery pack from the camera and reinsert it.

For further information, please contact your nearest authorized SIGMA subsidiary / distributor.
https://www.sigma-global.com/en/world-network/
We appreciate your continued support for our company and products.